Hasphl 2010 Error 1068.rar
How to Fix HASPHL 2010 Error 1068 on Windows 7 64-bit
If you are using a software that requires a hardware key (HASP) for protection, you may have encountered an error code 1068 when trying to run the software. This error means that the HASP key was not found or recognized by your computer. This can prevent you from using the software or accessing its features. In this article, we will explain what causes this error and how to fix it.
What is HASPHL 2010?
HASPHL 2010 is a software that allows you to create a virtual dongle emulator for your HASP key. This can be useful if you want to use your software on multiple computers without having to plug and unplug the key every time. However, creating a virtual dongle emulator requires some technical skills and knowledge. You also need to have access to the original HASP key and the software that uses it.
Download: https://t.co/id6BEam8F1
To create a virtual dongle emulator with HASPHL 2010, you need to follow these steps:
Download and install HASPHL 2010 from [here]. You need to choose the version that matches your operating system (32-bit or 64-bit).
Run HASPHL 2010 as administrator. You will see a window with four tabs: Service, Dumper, Emulator and About.
Go to the Service tab and click on Start Service. This will install a low-level driver that allows HASPHL 2010 to access the HASP key.
Go to the Dumper tab and click on Get Hardware ID. This will show you a unique identifier for your HASP key. Copy this ID and save it somewhere.
Click on Dump HASP button. This will create a file called hasp.dmp in the same folder as HASPHL 2010.
Go to the Emulator tab and click on Load Dump button. Select the hasp.dmp file that you created in the previous step.
Click on Install Driver button. This will install a virtual dongle driver that emulates your HASP key.
Restart your computer and run your software. It should work without asking for the HASP key.
What causes HASPHL 2010 Error 1068?
HASPHL 2010 Error 1068 is an error that occurs when the HASP key is not detected by your computer or by the software that uses it. This can happen for various reasons, such as:
The HASP key is missing or damaged.
The HASP key is disabled or blocked by your antivirus or firewall software.
The installation of the HASP key requires a reboot, but you did not restart your computer.
The HASP key driver is outdated or corrupted.
The HASP key firmware is incompatible with your operating system or software version.
How to fix HASPHL 2010 Error 1068?
To fix this error, you can try the following steps:
Make sure that the HASP key is plugged into a USB port on your computer and that it is not damaged or broken.
Check if the HASP key is recognized by your computer. You can use the Sentinel HASP Admin Control Center ([ to see if the key is detected and its status.
If the key is not recognized, try to reinstall the Sentinel HASP Runtime driver. You can download it from [here]. Follow the instructions to install and restart your computer.
If the key is recognized but still shows an error code 1068, try to update the firmware of the HASP key. You can use the Sentinel HASP Firmware Update tool from [here]. Follow the instructions to update and restart your computer.
If none of the above steps work, contact your software vendor or HASP provider for further assistance.
We hope this article helped you fix HASPHL 2010 error code 1068. If you have any questions or feedback, please leave a comment below.
References
[What Is Hasphl2010.exe? How To Repair It? [SOLVED] - Solvusoft]
[Fixing HASPHL 2010 Error 1068 on Windows 7 64-bit]